Gadgets Manual

Keeler Slit Lamps are instruments designed to give a very high level of performance. In order to ensure you gain the maximum benefits from your Keeler Slit Lamp we suggest that you read this instruction manual carefully before assembly or use. Please be sure to check all warning or rating labels on your Slit […]

[Read more →]

Here we’ll demonstrate, using our Nikon CP 950. The purpose of the photo is to show the Camera Tripod Mount Platform attached, and alignment of the Center Line of the UniClamp with respect to the center line of the Camera Lens. With this type of camera, the lens is fixed (doesn’t move in or out) […]

[Read more →]

Our patented Fluid Mount Tray is designed to improve the quality of scans available from a Nikon™ 8000 and 9000 scanners. Made from a genuine Nikon scanner tray to ensure perfect operation, it allows you to fluid mount your film (from 8mm to 2 1/4 and everything in between) for the best possible scans.

[Read more →]

Congratulations on your purchase of the FOCUS 3-MODE Universal Remote Control. By choosing the FOCUS 3-MODE remote you have opted for the User Friendly remote control solution. Made according to the highest quality, the FOCUS 3-MODE will provide you with long-term satisfaction. Please read these enclosed instructions carefully before putting your FOCUS 3-MODE to use.

[Read more →]

The document will serve as a guide for setting up the Nikon 995 camera for microscopic photography.
Attaching the Camera to the Microscope
1. Remove the right eyepiece from the microscope by loosening the small
Allen screw located around the bottom ring of the eyepiece using the supplied Allen wrench. Note: turning the small Allen screw counterclockwise loosens […]

[Read more →]

1. Gently insert your slide into the scanner slot. Do not force the slide into the scanner, otherwise the scanning mechanisms may be damaged. Also, never pull out a slide during a scan. Wait until the scan is finished and gently pull the slide out.
2. Launch Photoshop.
3. Select File>Import>Nikon Scan. The Nikon scanning software interface […]

[Read more →]

Camera Setup (Nikon S210)
1. Set camera to Macro Mode.
2 Set camera to Auto Mode (camera icon).
3. Set ISO to 64
4. Set AF35 dial to 4 (if applicable)
NOTE: If over-exposure occurs, enable Macro Mode setting. If over-exposure continues, back away from the subject and then zoom in as necessary. Camera will focus far away even if […]

[Read more →]

Nikon D40 and D40x
1. Install the ExpoDisc over the front of the camera’s lens.
2. Allow the camera to set an automatic exposure using the ‘P’, ‘S’ or ‘A’ modes, or set the correct manual exposure in ‘M’ mode.
3. Press the ‘MENU’ button to access the back LCD menus. Select ‘White Balance’ in the Shooting Menu […]

[Read more →]

The AQUATICA Pro Digital Housing is the result of a long and continuing relationship with the most demanding underwater photographers in the world. Each housing is handcrafted, quality checked and pressure tested to a 300 feet equivalent by a small group of specially trained individuals, each of whom takes the utmost pride and satisfaction in […]

[Read more →]

he ImageCORE’s Nikon Eclipse E-800 is set up as a high-resolution fluorescence acquisition microscope. The Eclipse is coupled to a 12-bit QImaging Retiga 1300i digital capture camera. Use of this acquisition system should be limited to those investigators that have observed their samples previously on lower resolution systems and require the image quality afforded by […]

[Read more →]