Gadgets Manual

Install hardware
Connect power cables. For the USA model (NEMA5-15P 100-120V outlets), the individual max output current per outlet is 6A and the total max output current for the 4 outlets is 15A. Use a power IN cable with 15A current rating and use power OUT cabless with 10A rating for each power outlet.

[Read more →]

Thank you for selecting the Motorola Netopia® 2210-02 ADSL2+ Gateway. This guide will help you set up and configure your network.
1.Windows users: Insert the Motorola Netopia CD into your CDROM drive. The Installation Guide Wizard should start automatically and the Welcome screen should appear to step through your connection installation(s).
The Motorola Netopia Installation Guide Wizard […]

[Read more →]

What is IEEE 1394
The 1394 standard was defined, and continues to be maintained, by the Institute of Electrical and Electronics Engineers, Inc. (IEEE). The technology allows for high-speed connections between computers and related devices and helps bridge the divide betweencomputers and consumer electronics. The technology is flexible, easy to use and offers high bandwidth at […]

[Read more →]

The HE104+DX is a high efficiency, high performance DC-to-DC converter that supplies +3.3V, +5V, +12V & -12V outputs to the PC/104 and the PCI-104 bus (also known as the Plus connector on the PC/104+ format). The HE104+DX is designed for low noise embedded computer systems, has a wide input range of 6-40V(>6:1) and is ideal […]

[Read more →]

Modem PCI G10 is a device designed for data transmission via GSM Network. Once a SIM card is inserted in the modem and the PC is powered on, you would be able to send SMS, access internet via GPRS/GSM networks (mobile networks). Modem PCI G10 supports the following data-bearers: CSD, GPRS, and SMS.

[Read more →]

Please take a moment and read this manual before you install the M2-ATX in your vehicle. Often times, rushing into installing the unit can result in serious damage to your M2-ATX board, computer and probably your car’s electrical system. The M2-ATX board has several wires that need to be installed in various places. When installing, […]

[Read more →]

The Power Jet plotter is shipped with a three pronged, grounded, power cord. The cord should always be used with a wall socket that is equipped to receive the three pronged plug. If the wall socket is only equipped to receive a two prong plug, Do NOT use a three-to-two reduction adapter unless you are […]

[Read more →]

ASSEMBLY
The following tools are required for assembly: HPL402: 3/4″ & 1/2″ wrench, 3/16″ hex wrench, 1/8″ hex wrench, and a thin layer of grease should be applied to all bolts. P-C-HLA-2: two 9/16″ wrenches, 1/8″ hex wrench, and a thin layer of grease should be applied to all bolts.

[Read more →]

Connecting the AccuMic PC
The AccuMic PC provides the highest quality audio to any desktop webconferencing system. Featuring Distributed Echo Cancellation, automated gain control, gating control and adaptive ambient mode, the AccuMic PC flawlessly picks up audio within a full 360 degree coverage area.You can connect an AccuMic PC Extension Mic (part no. 910-157-010) to expand […]

[Read more →]

The ADM-XPL (XPL) is an advanced PCI Mezzanine card (PMC) supporting Xilinx Virtex-II PRO™ (V2PRO) devices, the latest development in FPGA technology. The XPL supports 2VP7, 2VP20 or 2VP30 devices with either 1 or 2 embedded PowerPC processors. The XPL utilises an FPGA PCI bridge developed by Alpha Data supporting 64 bit PCI at up […]

[Read more →]