Gadgets Manual

Features of your new TV
The following are just a few of the many exciting features of your new Toshiba widescreen, integrated HD, LCD TV:
Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in most cases).
1080p output resolution.
Three HDMI™ digital, high-definition multimedia interfaces 1080p input support ( page 17).
HDMI new capability
Lip-Sync Latency activates an audio/video display timing adjustment function that allows HDMI source devices to accurately perform synchronization automatically.
Two sets of ColorStream® HD high-resolution component video inputs ( page 15).
QSound® audio technologies ( page 54).
Digital Audio Out optical audio connection with Dolby®
Digital optical output format ( page 45). CableClear® digital picture noise reduction ( page 53). PC IN (Analog RGB) computer terminal ( page 20). Channel Labeling allows you to put the Call Letters (e.g. ABC, HBO, etc.) on the screen along with the station numbers, so you always know what you’re watching ( page 32).
HDMI Control allows control of external devices from the TV remote via HDMI connection ( page 50)

Overview of steps for installing, setting up, and using your new TV
Follow these steps to set up your TV and begin using its many exciting features.
Carefully read the important safety, installation, care, and service information. Keep this manual for future reference.
Observe the following when choosing a location for the TV:
Read “Important notes about your LCD TV” ( page 6).
Place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. Secure the TV to a wall, pillar, or other immovable structure ( page 3).
Place the TV in a location where light does not reflect on the screen.
Place the TV far enough from walls and other objects to allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY.
Do not plug in any power cords until AFTER you have connected all cables and devices to your TV.
BEFORE connecting cables or devices to the TV, learn the functions of the TV’s connections and controls ( pages 10–11).
Connect your other electronic device(s) to the TV ( pages 12–20).
Install the batteries in the remote control ( page 21).
See “Learning about the remote control” ( page 22) for an overview of the buttons on the remote control.
Program the remote control to operate your other device(s) ( pages 23–27).
AFTER connecting all cables and devices, plug in the power cords for your TV and other devices. Then press
POWER on the TV control panel or remote control to turn on the TV. If the TV stops responding to the controls on the remote control or TV control panel and you cannot turn the TV off or on, please unplug the power cords few seconds then re-plug to try again.
See “Menu layout and navigation” for a quick overview of navigating the TV’s menu system ( page 28).
Program channels into the TV’s channel memory ( page 31).
For details on using the TV’s features, see Chapters 6 and 7.
For help, refer to the Troubleshooting Guide, Chapter 8.
For technical specifications and warranty information, see Chapter 9.
Enjoy your new TV.

Get pdf Integrated High Definition LCD Television 40RV52U, 40RV525U Owner’s Manual