Press and hold the play/pause button to place the iPod in sleep mode. Locate the hold switch on top of the iPod and turn to the on (orange) position. Begin by holding the iPod in your left hand. While pressing down with your thumbs, pull the bottom case firmly to the opposite direction. This will cause a slight gap to appear between the metal backing and the acrylic top case. Insert the edge of the larger tool into the gap you’ve created. Stage 2: Removing Hard Drive 5. Slowly work your way around the edges of the iPod while pressing in slightly. You may also twist the tool as you work your way around to release the tabs.
Be careful when using the plastic tool around the top and bottom of the iPod. These areas contact very delicate components. Carefully lay the backing over as shown. Be aware that there is a ribbon cable still attached.
Download iPod 4th Gen LCD Screen Installation Guide
0 comments for this entry ↓
There are no comments yet for this entry.
Leave a Comment