Gadgets Manual

Newer Technology, Inc. takes no responsibility for damage occurring to your iPod while installing this replacement battery. If you are concerned or unable to perform this installation process, please contact a sales representative for a quote on our professional installation service. Begin by laying your iPod on it’s back on a soft work surface. Using the included nylon screwdriver tool, gently insert the pointed end between the metal back casing and the acrylic front of the iPod, at the middle of the unit at the clip points shown.

You will insert the tool from the face of the unit, pointed toward the back (metal) portion of the case. Once inserted, work the tool from the center of the unit, towards the top and bottom (left to right in this picture. You may ?nd that if, you press inwards on the chrome back along the edge where these clips are located, you will ?nd one spot that is a little more forgiving than the rest of it - insert your tool there to begin. NOTE: This is by far NOT an easy process. Expect to fail repeatedly. Sometimes, a thumbnail is necessary to begin the process. If the included tool becomes damaged, you can resharpen it using a razor knife - don’t cut yourself! Once you have the bottom cover off, GENTLY tip it towards the top as shown. Be exceedingly careful of the ribbon connector that goes to the audio jack. It is easily damaged.

Download iPod Replacement Battery 3rd Generation