Gadgets Manual

Attach the 62mm male-to-67mm female step ring to the camera lens by screwing the 62mm male end of the step ring into the inside threads of the lens as shown below. 2.Attach the 4.25 tube to the 62mm male-to-67mm female step ring byscrewing the end of the tube with the outside threads in a clockwise direction into the female end of the step ring as shown below. 3. Attach the 360 One VR optic onto the 4.25 tube by screwing the threaded base of the optic into the top of the tube as shown below. 4.Set image quality at SHQ (Super High Quality) 5.Set ISO to 80 6.IS (Interlaced) Mode (this is the default) 7.Aperture Priority - Use maximum f-stop (i.e. f11) 8.Manual Focus - Green focus indicator approximately halfway between 0.7 and 1 ft. mark. Note:Keep in mind that this setting is a recommendation only. Because of variations in camera/lens combinations the correct focus setting may vary slightly. 9.Close the eyepiece shutter 10.ESP (default) metering 11.Flash Off 12.White balance as required 13.Sharpness:Hard 14.Contrast:High Photography

Tips & Hints 1. Position the sun behind a tree, sign, build-ing, etc. 2. Place objects in foreground for added inter-est. 3. Try exposure bracketing and Photoshop lay-ers. 4. Use a monopod or tripod for long exposures. 5. Keep the protective cover on when not in use. 6. Use the self-timer to be excluded from the shot. 7. Try lowest ISO values for best results. 8. Avoid touching mirror and optical surfaces. 9. Use air & brush to keep optical surfaces clean. 10. Use lens cleaner and cloths if needed. 11. Check our website for additional tips and hints.

Get PDF for Olympus E-20n Instructions for the 360 One VR