Gadgets Manual

WinWedge is an extremely powerful utility that is designed to add serial communications capabilities to any 32 bit Windows (95/98, ME, NT, 2000 or XP) application. The primary function of WinWedge is to provide a way to connect any RS232, RS422 or RS485 device to a PC and be able to read or write data […]

[Read more →]

The Cerebellum is intended as the main controller board for the Personal Rover. Built around PIC microcontroller, it provides the following functionality:
• Controls up to 8 hobby servos
• Open loop control of 2 DC motors
• Read from up to 8 analog input lines at 8-bit resolution
• 4 digital I/O lines
• 2 RS232 serial communications ports
• […]

[Read more →]

The HR-1002 is direct-current power supply, the voltage is +4.5V to 5.5V, the typical voltage is +5V, the electric current is bigger than 150mA.The user need to order if they use 3V Power supply.
The power source can share a power supply with other equipment, but must choose the power source with good ripple coefficient, and […]

[Read more →]

The BVS SDI V-Chip Encoder can be controlled in three different ways:
1) Control through the card edge rotary switch (limited functionality).
2) Control through the optional control panel.
3) Control through a PC and VC-1D Windows software (supplied), via RS232 or RS485.
Three GPI functions are also available when the VC-1D is operated with a control panel or […]

[Read more →]

The GH327 Interface Board provides either a stand-alone FM RDS application device, or an interfacing bridge to other devices via either a UART interface, or an XBee ZigBee RF module. The board uses an 8-bit AVR MCU to control all the interfaces, including the FM board. The MCU can be reprogrammed via an ISP header […]

[Read more →]

The PB-0555 is a Freescale MPC555 PowerPC Microcontroller module with I/O pin headers, oscillator circuit, power supply, and RS232 COM port. The MPC555 high integration processor architecture has been designed for high-performance and low-cost embedded control applications. A version of the PB-0555 can be used on the CME0555 Development Board, in your own application hardware […]

[Read more →]

The Datavideo RMC­150 is a remote control box for the SE­500. It allows the SE­500 to be controlled from a PC via an Ethernet connection.
Features
Ethernet to RS­232 remote controller for the Datavideo SE­500
LED Ethernet Communication Indicator
Compact design
Built in mounting plate for easy installation
Locking 2.1mm in­line DC In socket
12V 300mA power requirement (12V 500mA PSU supplied).

[Read more →]

The PB-0555 is a Freescale MPC555 PowerPC Microcontroller module with I/O pin headers, oscillator circuit, power supply, and RS232 COM port. The MPC555 high integration processor architecture has been designed for high-performance and low-cost embedded control applications. A version of the PB-0555 can be used on the CME0555 Development Board, in your own application hardware […]

[Read more →]

This document explains how to install the Puma Reader. You will understand how to program various parameters of the Puma Reader. Also this documentation explains the core components used in the device and how to “Quick Service” the Reader, if required.
Setting up the Reader:
Connect the 6 PIN RJ-11 attached to the Power Adapter to the […]

[Read more →]

The Multi Channel Systems device PGA64 amplifies analog signals with the option to change the gain. The input signal amplitude can be increased from a factor of 10 up to 5000. The gain is selectable by software and can be set for each of the 64 signal channels individually. The main parts consist of the […]

[Read more →]