Gadgets Manual

Carefully remove your system from it’s shipping box and verify that all parts are present. If there are missing or damaged parts contact All Pro Solutions or an authorized distributor immediately to correct any miss-packed or missing parts.
You should find the following packaged with your duplicator:
- Autoloader: AU4 (up to 330 disc capacity), or AU7 (up to 630 disc capacity) or AU9 (up to 900 disc capacity), depends on your model configuration
- Tower populated with drives
- Fire Wire Card and Cables
- This User Manual
- Software and Manual (PoINT)
- 5/64 hex head key (Allen wrench)
- Warranty card

For systems configured with printer, besides the above, you should find:
- Signature, Rimage, Teac or HP Printer
- Printer Plate (mounted on the bottom of printer)
- Printer Power Cable
- Printer Control Cable
- Printer Cable (USB or Parallel)

If your system is damaged during shipment, please contact the freight carrier first, and then contact your distributor or All Pro Solutions.
NOTE:
You should save your shipping materials so that if the need arises you can return your system for service. This packaging was designed specifically for shipping your system. Other packaging may not be as suitable.

Mounting the tower
For all systems, the tower is provided with a tower plate mounted on the bottom. This plate will help in stabilizing the tower on the adapter (see Fig.1a for AU4 and AU7 autoloaders or Fig.1b for AU9 autoloaders).
Make sure all thumbscrews are loose, place the tower on top of the adapter matching the blue marks (see Fig.2).
Do not tighten the thumbscrews until the drive alignment operation is performed. (see page 21)

Get pdf Standalone Fully Automated Asynchronous CD/DVD Duplication System User Manual